msgid ""
msgstr ""
"Project-Id-Version: LayerSlider WP 5.6.2\n"
"POT-Creation-Date: 2015-08-31 19:38+0200\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en_US\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.4\n"
"X-Poedit-KeywordsList: _e;__\n"
"X-Poedit-Basepath: ..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: static\n"

#: classes/class.km.autoupdate.v3.php:280
msgid "Your settings were successfully saved."
msgstr ""

#: config/defaults.php:14
msgid "Slider width"
msgstr ""

#: config/defaults.php:16
msgid ""
"The width of the slider in pixels. Accepts percents, but is only recommended "
"for full-width layout."
msgstr ""

#: config/defaults.php:28
msgid "Slider height"
msgstr ""

#: config/defaults.php:30
msgid "The height of the slider in pixels."
msgstr ""

#: config/defaults.php:42
msgid "Responsive"
msgstr ""

#: config/defaults.php:44
msgid ""
"Responsive mode provides optimal viewing experience across a wide range of "
"devices (from desktop to mobile) by adapting and scaling your sliders for "
"the viewing environment."
msgstr ""

#: config/defaults.php:51
msgid "Max-width"
msgstr ""

#: config/defaults.php:53
msgid ""
"The maximum width your slider can take in pixels when responsive mode is "
"enabled."
msgstr ""

#: config/defaults.php:67
msgid "Full-width"
msgstr ""

#: config/defaults.php:69
msgid ""
"Enable this option to force the slider to become full-width, even if your "
"theme does not support such layout."
msgstr ""

#: config/defaults.php:79
msgid "Responsive under"
msgstr ""

#: config/defaults.php:81
msgid ""
"Turns on responsive mode in a full-width slider under the specified value in "
"pixels. Can only be used with full-width mode."
msgstr ""

#: config/defaults.php:92
msgid "Layers container"
msgstr ""

#: config/defaults.php:94
msgid ""
"Creates an invisible inner container with the given dimension in pixels to "
"hold and center your layers."
msgstr ""

#: config/defaults.php:105
msgid "Hide on mobile"
msgstr ""

#: config/defaults.php:107
msgid "Hides the slider on mobile devices."
msgstr ""

#: config/defaults.php:115
msgid "Hide under"
msgstr ""

#: config/defaults.php:117
msgid "Hides the slider under the given value of browser width in pixels."
msgstr ""

#: config/defaults.php:127
msgid "Hide over"
msgstr ""

#: config/defaults.php:129
msgid "Hides the slider over the given value of browser width in pixel."
msgstr ""

#: config/defaults.php:142
msgid "Start slideshow"
msgstr ""

#: config/defaults.php:144
msgid "Slideshow will automatically start after pages have loaded."
msgstr ""

#: config/defaults.php:150
msgid "Start in viewport"
msgstr ""

#: config/defaults.php:152
msgid "The slider will start only if it enters into the viewport."
msgstr ""

#: config/defaults.php:158
msgid "Pause on hover"
msgstr ""

#: config/defaults.php:160
msgid ""
"Slideshow will temporally pause when someone moves the mouse cursor over the "
"slider."
msgstr ""

#: config/defaults.php:166
msgid "Start with slide"
msgstr ""

#: config/defaults.php:168
msgid ""
"The slider will start with the specified slide. You can use the value "
"\"random\"."
msgstr ""

#: config/defaults.php:177
msgid "Animate starting slide"
msgstr ""

#: config/defaults.php:179
msgid ""
"Disabling this option will result a static starting slide for the fisrt time "
"on page load."
msgstr ""

#: config/defaults.php:185
msgid "Shuffle mode"
msgstr ""

#: config/defaults.php:187
msgid ""
"Slideshow will proceed in random order. This feature does not work with "
"looping."
msgstr ""

#: config/defaults.php:194
msgid "Two way slideshow"
msgstr ""

#: config/defaults.php:196
msgid "Slideshow can go backwards if someone switches to a previous slide."
msgstr ""

#: config/defaults.php:203 templates/tmpl-slider-settings.php:129
msgid "Loops"
msgstr ""

#: config/defaults.php:205
msgid "Number of loops if slideshow is enabled. Zero means infinite loops."
msgstr ""

#: config/defaults.php:213
msgid "Force the number of loops"
msgstr ""

#: config/defaults.php:215
msgid ""
"The slider will always stop at the given number of loops, even if someone "
"restarts slideshow."
msgstr ""

#: config/defaults.php:221
msgid "Keyboard navigation"
msgstr ""

#: config/defaults.php:223
msgid "You can navigate through slides with the left and right arrow keys."
msgstr ""

#: config/defaults.php:229
msgid "Touch navigation"
msgstr ""

#: config/defaults.php:231
msgid "Gesture-based navigation when swiping on touch-enabled devices."
msgstr ""

#: config/defaults.php:242 templates/tmpl-slider-settings.php:154
msgid "Skin"
msgstr ""

#: config/defaults.php:244
msgid ""
"The skin used for this slider. The 'noskin' skin is a border- and buttonless "
"skin. Your custom skins will appear in the list when you create their "
"folders."
msgstr ""

#: config/defaults.php:251
msgid "Background color"
msgstr ""

#: config/defaults.php:253
msgid ""
"Global background color of the slider. Slides with non-transparent "
"background will cover this one. You can use all CSS methods such as HEX or "
"RGB(A) values."
msgstr ""

#: config/defaults.php:259 templates/tmpl-slider-settings.php:178
msgid "Background image"
msgstr ""

#: config/defaults.php:261
msgid ""
"Global background image of the slider. Slides with non-transparent "
"backgrounds will cover it. This image will not scale in responsive mode."
msgstr ""

#: config/defaults.php:266
msgid "Initial fade duration"
msgstr ""

#: config/defaults.php:268
msgid ""
"Change the duration of the initial fade animation when the page loads. Enter "
"0 to disable fading."
msgstr ""

#: config/defaults.php:278
msgid "Slider CSS"
msgstr ""

#: config/defaults.php:280
msgid ""
"You can enter custom CSS to change some style properties on the slider "
"wrapper element. More complex CSS should be applied with the Custom Styles "
"Editor."
msgstr ""

#: config/defaults.php:294
msgid "Show Prev & Next buttons"
msgstr ""

#: config/defaults.php:296
msgid "Disabling this option will hide the Prev and Next buttons."
msgstr ""

#: config/defaults.php:303
msgid "Show Prev & Next buttons on hover"
msgstr ""

#: config/defaults.php:305
msgid ""
"Show the buttons only when someone moves the mouse cursor over the slider. "
"This option depends on the previous setting."
msgstr ""

#: config/defaults.php:311
msgid "Show Start & Stop buttons"
msgstr ""

#: config/defaults.php:313
msgid "Disabling this option will hide the Start & Stop buttons."
msgstr ""

#: config/defaults.php:319
msgid "Show slide navigation buttons"
msgstr ""

#: config/defaults.php:321
msgid "Disabling this option will hide slide navigation buttons or thumbnails."
msgstr ""

#: config/defaults.php:328
msgid "Slide navigation on hover"
msgstr ""

#: config/defaults.php:330
msgid ""
"Slide navigation buttons (including thumbnails) will be shown on mouse hover "
"only."
msgstr ""

#: config/defaults.php:336
msgid "Show bar timer"
msgstr ""

#: config/defaults.php:338
msgid "Show the bar timer to indicate slideshow progression."
msgstr ""

#: config/defaults.php:345
msgid "Show circle timer"
msgstr ""

#: config/defaults.php:347
msgid "Use circle timer to indicate slideshow progression."
msgstr ""

#: config/defaults.php:359 templates/tmpl-slider-settings.php:254
msgid "Thumbnail navigation"
msgstr ""

#: config/defaults.php:361
msgid "Use thumbnail navigation instead of slide bullet buttons."
msgstr ""

#: config/defaults.php:363
msgid "Disabled"
msgstr ""

#: config/defaults.php:364
msgid "Hover"
msgstr ""

#: config/defaults.php:365
msgid "Always"
msgstr ""

#: config/defaults.php:372
msgid "Thumbnail container width"
msgstr ""

#: config/defaults.php:374
msgid "The width of the thumbnail area."
msgstr ""

#: config/defaults.php:380
msgid "Thumbnail width"
msgstr ""

#: config/defaults.php:382
msgid "The width of thumbnails in the navigation area."
msgstr ""

#: config/defaults.php:391
msgid "Thumbnail height"
msgstr ""

#: config/defaults.php:393
msgid "The height of thumbnails in the navigation area."
msgstr ""

#: config/defaults.php:403
msgid "Active thumbnail opacity"
msgstr ""

#: config/defaults.php:405
msgid "Opacity in percentage of the active slide's thumbnail."
msgstr ""

#: config/defaults.php:415
msgid "Inactive thumbnail opacity"
msgstr ""

#: config/defaults.php:417
msgid "Opacity in percentage of inactive slide thumbnails."
msgstr ""

#: config/defaults.php:431
msgid "Automatically play videos"
msgstr ""

#: config/defaults.php:433
msgid "Videos will be automatically started on the active slide."
msgstr ""

#: config/defaults.php:441
msgid "Pause slideshow"
msgstr ""

#: config/defaults.php:443
msgid ""
"The slideshow can temporally be paused while videos are playing. You can "
"choose to permanently stop the pause until manual restarting."
msgstr ""

#: config/defaults.php:445
msgid "While playing"
msgstr ""

#: config/defaults.php:446
msgid "Permanently"
msgstr ""

#: config/defaults.php:447
msgid "No action"
msgstr ""

#: config/defaults.php:461
msgid "Youtube preview"
msgstr ""

#: config/defaults.php:463
msgid ""
"The preview image quaility for YouTube videos. Please note, some videos do "
"not have HD previews, and you may need to choose a lower quaility."
msgstr ""

#: config/defaults.php:465
msgid "Maximum quality"
msgstr ""

#: config/defaults.php:466
msgid "High quality"
msgstr ""

#: config/defaults.php:467
msgid "Medium quality"
msgstr ""

#: config/defaults.php:468
msgid "Default quality"
msgstr ""

#: config/defaults.php:479
msgid "Image preload"
msgstr ""

#: config/defaults.php:481
msgid "Preloads images used in the next slides for seamless animations."
msgstr ""

#: config/defaults.php:486
msgid "Lazy load images"
msgstr ""

#: config/defaults.php:488
msgid ""
"Loads images only when needed to save bandwidth and server resources. Relies "
"on the preload feature."
msgstr ""

#: config/defaults.php:496
msgid "Use relative URLs"
msgstr ""

#: config/defaults.php:498
msgid ""
"Use relative URLs for local images. This setting could be important when "
"moving your WP installation."
msgstr ""

#: config/defaults.php:512 templates/tmpl-slider-settings.php:24
msgid "YourLogo"
msgstr ""

#: config/defaults.php:514
msgid ""
"A fixed image layer can be shown above the slider that remains still during "
"slide progression. Can be used to display logos or watermarks."
msgstr ""

#: config/defaults.php:521
msgid "YourLogo style"
msgstr ""

#: config/defaults.php:523
msgid "CSS properties to control the image placement and appearance."
msgstr ""

#: config/defaults.php:530
msgid "YourLogo link"
msgstr ""

#: config/defaults.php:532
msgid "Enter an URL to link the YourLogo image."
msgstr ""

#: config/defaults.php:539
msgid "Link target"
msgstr ""

#: config/defaults.php:667
msgid "Set a slide image"
msgstr ""

#: config/defaults.php:669
msgid ""
"The slide image/background. Click on the image to open the WordPress Media "
"Library to choose or upload an image."
msgstr ""

#: config/defaults.php:681
msgid "Set a slide thumbnail"
msgstr ""

#: config/defaults.php:683
msgid ""
"The thumbnail image of this slide. Click on the image to open the WordPress "
"Media Library to choose or upload an image. If you leave this field empty, "
"the slide image will be used."
msgstr ""

#: config/defaults.php:697
msgid "Slide delay"
msgstr ""

#: config/defaults.php:699
msgid ""
"Here you can set the time interval between slide changes, this slide will "
"stay visible for the time specified here. This value is in millisecs, so the "
"value 1000 means 1 second. Please don't use 0 or very low values."
msgstr ""

#: config/defaults.php:728
msgid "Time Shift"
msgstr ""

#: config/defaults.php:730
msgid ""
"You can control here the timing of the layer animations when the slider "
"changes to this slide with a 3D/2D transition. Zero means that the layers of "
"this slide will animate in when the slide transition ends. You can time-"
"shift the starting time of the layer animations with positive or negative "
"values."
msgstr ""

#: config/defaults.php:738 config/defaults.php:1181
msgid "Enter URL"
msgstr ""

#: config/defaults.php:740
msgid "If you want to link the whole slide, enter the URL of your link here."
msgstr ""

#: config/defaults.php:749
msgid "Link Target"
msgstr ""

#: config/defaults.php:765
msgid "#ID"
msgstr ""

#: config/defaults.php:767
msgid ""
"You can apply an ID attribute on the HTML element of this slide to work with "
"it in your custom CSS or Javascript code."
msgstr ""

#: config/defaults.php:775
msgid "Deeplink"
msgstr ""

#: config/defaults.php:777
msgid ""
"You can specify a slide alias name which you can use in your URLs with a "
"hash mark, so LayerSlider will start with the correspondig slide."
msgstr ""

#: config/defaults.php:790 config/defaults.php:1150 templates/tmpl-slide.php:72
msgid "Hidden"
msgstr ""

#: config/defaults.php:792 templates/tmpl-slide.php:73
msgid ""
"If you don't want to use this slide in your front-page, but you want to keep "
"it, you can hide it with this switch."
msgstr ""

#: config/defaults.php:868 config/defaults.php:984
msgid "OffsetX"
msgstr ""

#: config/defaults.php:870
msgid ""
"The horizontal offset to align the starting position of layers. Positive and "
"negative numbers are allowed or enter left / right to position the layer out "
"of the frame."
msgstr ""

#: config/defaults.php:875 config/defaults.php:991
msgid "OffsetY"
msgstr ""

#: config/defaults.php:877
msgid ""
"The vertical offset to align the starting position of layers. Positive and "
"negative numbers are allowed or enter top / bottom to position the layer out "
"of the frame."
msgstr ""

#: config/defaults.php:885 config/defaults.php:1001
#: views/transition_builder.php:143 views/transition_builder.php:200
#: views/transition_builder.php:279 views/transition_builder.php:409
#: views/transition_builder.php:651 views/transition_builder.php:721
#: views/transition_builder.php:809 views/transition_builder.php:963
msgid "Duration"
msgstr ""

#: config/defaults.php:887
msgid ""
"The transition duration in milliseconds when the layer enters into the "
"slide. A second equals to 1000 milliseconds."
msgstr ""

#: config/defaults.php:896 config/defaults.php:1119
#: views/transition_builder.php:106 views/transition_builder.php:185
#: views/transition_builder.php:261 views/transition_builder.php:321
#: views/transition_builder.php:388 views/transition_builder.php:610
#: views/transition_builder.php:706 views/transition_builder.php:787
#: views/transition_builder.php:864 views/transition_builder.php:942
msgid "Delay"
msgstr ""

#: config/defaults.php:898
msgid ""
"Delays the transition with the given amount of milliseconds before the layer "
"enters into the slide. A second equals to 1000 milliseconds."
msgstr ""

#: config/defaults.php:907 config/defaults.php:1023
#: views/transition_builder.php:145 views/transition_builder.php:202
#: views/transition_builder.php:281 views/transition_builder.php:411
#: views/transition_builder.php:653 views/transition_builder.php:723
#: views/transition_builder.php:811 views/transition_builder.php:965
msgid "Easing"
msgstr ""

#: config/defaults.php:909 config/defaults.php:1025
#: views/transition_builder.php:147 views/transition_builder.php:204
#: views/transition_builder.php:283 views/transition_builder.php:413
#: views/transition_builder.php:656 views/transition_builder.php:725
#: views/transition_builder.php:814 views/transition_builder.php:967
msgid ""
"The timing function of the animation. With this function you can manipulate "
"the movement of the animated object. Please click on the link next to this "
"select field to open easings.net for more information and real-time examples."
msgstr ""

#: config/defaults.php:914 config/defaults.php:1030
#: views/transition_builder.php:454 views/transition_builder.php:1008
msgid "Fade"
msgstr ""

#: config/defaults.php:916 config/defaults.php:1032
msgid "Fade the layer during the transition."
msgstr ""

#: config/defaults.php:924 config/defaults.php:1041
msgid "Rotate"
msgstr ""

#: config/defaults.php:926
msgid ""
"Rotates the layer clockwise from the given angle to zero degree. Negative "
"values are allowed for counterclockwise rotation."
msgstr ""

#: config/defaults.php:931 config/defaults.php:1048
#: views/transition_builder.php:183 views/transition_builder.php:249
#: views/transition_builder.php:259 views/transition_builder.php:319
#: views/transition_builder.php:474 views/transition_builder.php:704
#: views/transition_builder.php:785 views/transition_builder.php:862
#: views/transition_builder.php:1028
msgid "RotateX"
msgstr ""

#: config/defaults.php:933
msgid ""
"Rotates the layer along the X (horizontal) axis from the given angle to zero "
"degree. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:938 config/defaults.php:1055
#: views/transition_builder.php:184 views/transition_builder.php:260
#: views/transition_builder.php:320 views/transition_builder.php:476
#: views/transition_builder.php:705 views/transition_builder.php:786
#: views/transition_builder.php:863 views/transition_builder.php:1030
msgid "RotateY"
msgstr ""

#: config/defaults.php:940
msgid ""
"Rotates the layer along the Y (vertical) axis from the given angle to zero "
"degree. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:945 config/defaults.php:1062
msgid "SkewX"
msgstr ""

#: config/defaults.php:947
msgid ""
"Skews the layer along the X (horizontal) axis from the given angle to 0 "
"degree. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:952 config/defaults.php:1069
msgid "SkewY"
msgstr ""

#: config/defaults.php:954
msgid ""
"Skews the layer along the Y (vertical) axis from the given angle to 0 "
"degree. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:959 config/defaults.php:1076
msgid "ScaleX"
msgstr ""

#: config/defaults.php:961
msgid "Scales the layer's width from the given value to its original size."
msgstr ""

#: config/defaults.php:967 config/defaults.php:1084
msgid "ScaleY"
msgstr ""

#: config/defaults.php:969
msgid "Scales the layer's height from the given value to its original size."
msgstr ""

#: config/defaults.php:975 config/defaults.php:1092
msgid "TransformOrigin"
msgstr ""

#: config/defaults.php:977 config/defaults.php:1094
msgid ""
"This option allows you to modify the origin for transformations of the layer "
"according to its position. The three values represent the X, Y and Z axis in "
"3D space. OriginX can be left, center, right, a number or a percentage "
"value. OriginY can be top, center, bottom, a number or a percentage value. "
"OriginZ can be a number and corresponds the depth in 3D space."
msgstr ""

#: config/defaults.php:986
msgid ""
"The horizontal offset to align the ending position of layers. Positive and "
"negative numbers are allowed or write left / right to position the layer out "
"of the frame."
msgstr ""

#: config/defaults.php:993
msgid ""
"The vertical offset to align the starting position of layers. Positive and "
"negative numbers are allowed or write top / bottom to position the layer out "
"of the frame."
msgstr ""

#: config/defaults.php:1003
msgid ""
"The transition duration in milliseconds when the layer leaves the slide. A "
"second equals to 1000 milliseconds."
msgstr ""

#: config/defaults.php:1012
msgid "Show until"
msgstr ""

#: config/defaults.php:1014
msgid ""
"The layer will be visible for the time you specify here, then it will slide "
"out. You can use this setting for layers to leave the slide before the slide "
"itself animates out, or for example before other layers will slide in. This "
"value in millisecs, so the value 1000 means 1 second."
msgstr ""

#: config/defaults.php:1043
msgid ""
"Rotates the layer clockwise by the given angle from its original position. "
"Negative values are allowed for counterclockwise rotation."
msgstr ""

#: config/defaults.php:1050
msgid ""
"Rotates the layer along the X (horizontal) axis by the given angle from its "
"original state. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:1057
msgid ""
"Rotates the layer along the Y (vertical) axis by the given angle from its "
"orignal state. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:1064
msgid ""
"Skews the layer along the X (horizontal) axis by the given angle from its "
"orignal state. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:1071
msgid ""
"Skews the layer along the Y (vertical) axis by the given angle from its "
"original state. Negative values are allowed for reverse direction."
msgstr ""

#: config/defaults.php:1078
msgid "Scales the layer's width by the given value from its original size."
msgstr ""

#: config/defaults.php:1086
msgid "Scales the layer's height by the given value from its original size."
msgstr ""

#: config/defaults.php:1099
msgid "Parallax Level"
msgstr ""

#: config/defaults.php:1101
msgid ""
"Applies a parallax effect on layers when you move your mouse over the "
"slider. Higher values make the layer more sensitive to mouse move. Negative "
"values are allowed."
msgstr ""

#: config/defaults.php:1108 config/defaults.php:1113
#: views/transition_builder.php:450 views/transition_builder.php:1004
msgid "Type"
msgstr ""

#: config/defaults.php:1121
msgid ""
"Delay before the animation start when the layer slides out. This value is in "
"millisecs, so the value 1000 means 1 second."
msgstr ""

#: config/defaults.php:1130 config/defaults.php:1140
#: views/transition_builder.php:482 views/transition_builder.php:1036
msgid "Scale"
msgstr ""

#: config/defaults.php:1132
msgid ""
"You can set the initial scale of this layer here which will be animated to "
"the default (1.0) value."
msgstr ""

#: config/defaults.php:1142
msgid ""
"You can set the ending scale value here, this sublayer will be animated from "
"the default (1.0) value to yours."
msgstr ""

#: config/defaults.php:1152
msgid ""
"If you don't want to use this layer, but you want to keep it, you can hide "
"it with this switch."
msgstr ""

#: config/defaults.php:1167
msgid "Distance"
msgstr ""

#: config/defaults.php:1169
msgid ""
"The default value is -1 which means that the layer will be positioned "
"exactly outside of the slide container. You can use the default setting in "
"most of the cases. If you need to set the start or end position of the layer "
"from further of the edges of the slide container, you can use 2, 3 or higher "
"values."
msgstr ""

#: config/defaults.php:1183
msgid ""
"If you want to link your layer, type here the URL. You can use a hash mark "
"followed by a number to link this layer to another slide. Example: #3 - this "
"will switch to the third slide."
msgstr ""

#: config/defaults.php:1191
msgid "URL target"
msgstr ""

#: config/defaults.php:1208
msgid "Width"
msgstr ""

#: config/defaults.php:1210
#, php-format
msgid ""
"You can set the width of your layer. You can use pixels, percentage, or the "
"default value 'auto'. Examples: 100px, 50% or auto."
msgstr ""

#: config/defaults.php:1218
msgid "Height"
msgstr ""

#: config/defaults.php:1220
#, php-format
msgid ""
"You can set the height of your layer. You can use pixels, percentage, or the "
"default value 'auto'. Examples: 100px, 50% or auto"
msgstr ""

#: config/defaults.php:1228 config/defaults.php:1248 config/defaults.php:1288
#: views/transition_builder.php:461 views/transition_builder.php:1015
msgid "Top"
msgstr ""

#: config/defaults.php:1230
msgid ""
"The layer position from the top of the slide. You can use pixels and "
"percentage. Examples: 100px or 50%. You can move your layers in the preview "
"above with a drag n' drop, or set the exact values here."
msgstr ""

#: config/defaults.php:1238 config/defaults.php:1278 config/defaults.php:1318
#: views/transition_builder.php:464 views/transition_builder.php:1018
msgid "Left"
msgstr ""

#: config/defaults.php:1240
msgid ""
"The layer position from the left side of the slide. You can use pixels and "
"percentage. Examples: 100px or 50%. You can move your layers in the preview "
"above with a drag n' drop, or set the exact values here."
msgstr ""

#: config/defaults.php:1250
msgid "Padding on the top of the layer. Example: 10px"
msgstr ""

#: config/defaults.php:1258 config/defaults.php:1298
#: views/transition_builder.php:462 views/transition_builder.php:1016
msgid "Right"
msgstr ""

#: config/defaults.php:1260
msgid "Padding on the right side of the layer. Example: 10px"
msgstr ""

#: config/defaults.php:1268 config/defaults.php:1308
#: views/transition_builder.php:463 views/transition_builder.php:1017
msgid "Bottom"
msgstr ""

#: config/defaults.php:1270
msgid "Padding on the bottom of the layer. Example: 10px"
msgstr ""

#: config/defaults.php:1280
msgid "Padding on the left side of the layer. Example: 10px"
msgstr ""

#: config/defaults.php:1290
msgid "Border on the top of the layer. Example: 5px solid #000"
msgstr ""

#: config/defaults.php:1300
msgid "Border on the right side of the layer. Example: 5px solid #000"
msgstr ""

#: config/defaults.php:1310
msgid "Border on the bottom of the layer. Example: 5px solid #000"
msgstr ""

#: config/defaults.php:1320
msgid "Border on the left side of the layer. Example: 5px solid #000"
msgstr ""

#: config/defaults.php:1328
msgid "Family"
msgstr ""

#: config/defaults.php:1330
msgid ""
"List of your chosen fonts separated with a comma. Please use apostrophes if "
"your font names contains white spaces. Example: Helvetica, Arial, sans-serif"
msgstr ""

#: config/defaults.php:1338
msgid "Size"
msgstr ""

#: config/defaults.php:1340
msgid "The font size in pixels. Example: 16px."
msgstr ""

#: config/defaults.php:1348
msgid "Line-height"
msgstr ""

#: config/defaults.php:1350
msgid ""
"The line height of your text. The default setting is 'normal'. Example: 22px"
msgstr ""

#: config/defaults.php:1358
msgid "Color"
msgstr ""

#: config/defaults.php:1360
msgid ""
"The color of your text. You can use color names, hexadecimal, RGB or RGBA "
"values. Example: #333"
msgstr ""

#: config/defaults.php:1368
msgid "Background"
msgstr ""

#: config/defaults.php:1370
msgid ""
"The background color of your layer. You can use color names, hexadecimal, "
"RGB or RGBA values as well as the 'transparent' keyword. Example: #FFF"
msgstr ""

#: config/defaults.php:1378
msgid "Rounded corners"
msgstr ""

#: config/defaults.php:1380
msgid "If you want rounded corners, you can set its radius here. Example: 5px"
msgstr ""

#: config/defaults.php:1398
msgid "Custom styles"
msgstr ""

#: config/defaults.php:1400
msgid ""
"If you want to set style settings other than above, you can use here any CSS "
"codes. Please make sure to write valid markup."
msgstr ""

#: config/defaults.php:1419 views/slider_list.php:159
msgid "ID"
msgstr ""

#: config/defaults.php:1421
msgid ""
"You can apply an ID attribute on the HTML element of this layer to work with "
"it in your custom CSS or Javascript code."
msgstr ""

#: config/defaults.php:1429
msgid "Classes"
msgstr ""

#: config/defaults.php:1431
msgid ""
"You can apply classes on the HTML element of this layer to work with it in "
"your custom CSS or Javascript code."
msgstr ""

#: config/defaults.php:1439
msgid "Title"
msgstr ""

#: config/defaults.php:1441
msgid ""
"You can add a title to this layer which will display as a tooltip if someone "
"holds his mouse cursor over the layer."
msgstr ""

#: config/defaults.php:1449
msgid "Alt"
msgstr ""

#: config/defaults.php:1451
msgid ""
"You can add an alternative text to your layer which is indexed by search "
"engine robots and it helps people with certain disabilities."
msgstr ""

#: config/defaults.php:1459
msgid "Rel"
msgstr ""

#: config/defaults.php:1461
msgid ""
"Some plugin may use the rel attribute of a linked content, here you can "
"specify it to make interaction with these plugins."
msgstr ""

#: templates/tmpl-add-slider.php:7
msgid "Name your new slider"
msgstr ""

#: templates/tmpl-add-slider.php:9
msgid "e.g. Homepage slider"
msgstr ""

#: templates/tmpl-add-slider.php:10
msgid "Add slider"
msgstr ""

#: templates/tmpl-beta-feedback.php:4
msgid "Using beta version"
msgstr ""

#: templates/tmpl-beta-feedback.php:5
msgid "Send feedback"
msgstr ""

#: templates/tmpl-demo-sliders.php:7
msgid "Choose a demo slider to import"
msgstr ""

#: templates/tmpl-demo-sliders.php:21
msgid "Import all demo sliders (might be slow)"
msgstr ""

#: templates/tmpl-demo-sliders.php:26
msgid ""
"More demo content can be found in the downloaded package from CodeCanyon. "
"You can import them in the usual way in the \"Import and Export Sliders\" "
"section below."
msgstr ""

#: templates/tmpl-layer-item.php:6
msgid "Hide layer in the editor."
msgstr ""

#: templates/tmpl-layer-item.php:7
msgid "Prevent layer from dragging in the editor."
msgstr ""

#: templates/tmpl-layer-item.php:11 templates/tmpl-layer-item.php:12
msgid "Remove this layer"
msgstr ""

#: templates/tmpl-layer.php:8
msgid "Image"
msgstr ""

#: templates/tmpl-layer.php:9
msgid "Text"
msgstr ""

#: templates/tmpl-layer.php:10
msgid "HTML / Video / Audio"
msgstr ""

#: templates/tmpl-layer.php:11
msgid "Dynamic content from posts"
msgstr ""

#: templates/tmpl-layer.php:19
msgid "Paragraph"
msgstr ""

#: templates/tmpl-layer.php:20
msgid "H1"
msgstr ""

#: templates/tmpl-layer.php:21
msgid "H2"
msgstr ""

#: templates/tmpl-layer.php:22
msgid "H3"
msgstr ""

#: templates/tmpl-layer.php:23
msgid "H4"
msgstr ""

#: templates/tmpl-layer.php:24
msgid "H5"
msgstr ""

#: templates/tmpl-layer.php:25
msgid "H6"
msgstr ""

#: templates/tmpl-layer.php:40
msgid "Click on the image preview to open WordPress Media Library or"
msgstr ""

#: templates/tmpl-layer.php:41
msgid "insert from URL"
msgstr ""

#: templates/tmpl-layer.php:42 templates/tmpl-slide.php:30
msgid "use post image"
msgstr ""

#: templates/tmpl-layer.php:48
msgid ""
"Type here the contents of your layer. You can use any HTML codes in this "
"field to insert content others then text. This field is also shortcode-"
"aware, so you can insert content from other plugins as well as video embed "
"codes."
msgstr ""

#: templates/tmpl-layer.php:52
msgid "Add Media"
msgstr ""

#: templates/tmpl-layer.php:54
msgid "Insert self-hosted video or audio"
msgstr ""

#: templates/tmpl-layer.php:81
msgid ""
"Click on one or more post placeholders to insert them into your layer's "
"content. Post placeholders act like shortcodes in WP, and they will be "
"filled with the actual content from your posts."
msgstr ""

#: templates/tmpl-layer.php:82
msgid "Limit text length (if any)"
msgstr ""

#: templates/tmpl-layer.php:84 templates/tmpl-slide.php:78
msgid "Configure post options"
msgstr ""

#: templates/tmpl-layer.php:94
msgid "Transition in"
msgstr ""

#: templates/tmpl-layer.php:133
msgid "Transition out"
msgstr ""

#: templates/tmpl-layer.php:172
msgid "Other options"
msgstr ""

#: templates/tmpl-layer.php:183 templates/tmpl-slide.php:58
msgid "use post URL"
msgstr ""

#: templates/tmpl-layer.php:210
msgid "Layout & Positions"
msgstr ""

#: templates/tmpl-layer.php:221
msgid "Padding"
msgstr ""

#: templates/tmpl-layer.php:232
msgid "Border"
msgstr ""

#: templates/tmpl-layer.php:243
msgid "Font"
msgstr ""

#: templates/tmpl-layer.php:254 templates/tmpl-slider-settings.php:23
msgid "Misc"
msgstr ""

#: templates/tmpl-layer.php:259
msgid "Word-wrap"
msgstr ""

#: templates/tmpl-layer.php:260
msgid ""
"If you use custom sized layers, you have to enable this setting to wrap your "
"text."
msgstr ""

#: templates/tmpl-layer.php:264
msgid "Custom CSS"
msgstr ""

#: templates/tmpl-layer.php:265
msgid ""
"If you want to set style settings other then above, you can use here any CSS "
"codes. Please make sure to write valid markup."
msgstr ""

#: templates/tmpl-post-options.php:34
msgid "Find posts with the filters above"
msgstr ""

#: templates/tmpl-post-options.php:53
msgid "Don't filter categories"
msgstr ""

#: templates/tmpl-post-options.php:65
msgid "Don't filter tags"
msgstr ""

#: templates/tmpl-post-options.php:77
msgid "Don't filter taxonomies"
msgstr ""

#: templates/tmpl-post-options.php:105
msgid "Order results by"
msgstr ""

#: templates/tmpl-post-options.php:106
msgid "On this slide"
msgstr ""

#: templates/tmpl-post-options.php:118
msgid "Get the "
msgstr ""

#: templates/tmpl-post-options.php:120
msgid "following"
msgstr ""

#: templates/tmpl-post-options.php:125
msgid "item in the set of matched selection"
msgstr ""

#: templates/tmpl-post-options.php:128
msgid "Preview from currenty matched elements"
msgstr ""

#: templates/tmpl-share-sheet.php:37
msgid "Enjoy using LayerSlider?"
msgstr ""

#: templates/tmpl-share-sheet.php:41
msgid ""
"If so, please consider recommending it to your friends on your favorite "
"social network!"
msgstr ""

#: templates/tmpl-share-sheet.php:45
msgid "Share"
msgstr ""

#: templates/tmpl-share-sheet.php:49
msgid "Tweet"
msgstr ""

#: templates/tmpl-slide.php:9
msgid "Slide Options"
msgstr ""

#: templates/tmpl-slide.php:29 templates/tmpl-slide.php:30
#: templates/tmpl-slide.php:40 views/slider_list.php:371
#: views/transition_builder.php:535 views/transition_builder.php:554
msgid "or"
msgstr ""

#: templates/tmpl-slide.php:29 templates/tmpl-slide.php:40
msgid "enter URL"
msgstr ""

#: templates/tmpl-slide.php:49
msgid ""
"You can select your desired slide transitions by clicking on this button."
msgstr ""

#: templates/tmpl-slide.php:79
msgid "Duplicate this slide"
msgstr ""

#: templates/tmpl-slide.php:93 views/transition_builder.php:67
#: views/transition_builder.php:349 views/transition_builder.php:569
#: views/transition_builder.php:901
msgid "Preview"
msgstr ""

#: templates/tmpl-slide.php:112 views/transition_builder.php:77
#: views/transition_builder.php:359 views/transition_builder.php:579
#: views/transition_builder.php:911
msgid "Enter Preview"
msgstr ""

#: templates/tmpl-slide.php:121
msgid "Layers"
msgstr ""

#: templates/tmpl-slide.php:123 views/slider_list.php:119
msgid "Add New"
msgstr ""

#: templates/tmpl-slide.php:127
msgid "Layer options"
msgstr ""

#: templates/tmpl-slide.php:128
msgid "Timeline"
msgstr ""

#: templates/tmpl-slide.php:135
msgid "Content"
msgstr ""

#: templates/tmpl-slide.php:136 views/transition_builder.php:404
#: views/transition_builder.php:958
msgid "Transition"
msgstr ""

#: templates/tmpl-slide.php:137
msgid "Link & Attributes"
msgstr ""

#: templates/tmpl-slide.php:138
msgid "Styles"
msgstr ""

#: templates/tmpl-slider-settings.php:6
msgid "Type your slider name here"
msgstr ""

#: templates/tmpl-slider-settings.php:8
msgid "e.g. homepageslider"
msgstr ""

#: templates/tmpl-slider-settings.php:14 views/slider_edit.php:144
msgid "Slider Settings"
msgstr ""

#: templates/tmpl-slider-settings.php:17
msgid "Layout"
msgstr ""

#: templates/tmpl-slider-settings.php:18
msgid "Slideshow"
msgstr ""

#: templates/tmpl-slider-settings.php:19 templates/tmpl-slider-settings.php:252
msgid "Appearance"
msgstr ""

#: templates/tmpl-slider-settings.php:20
msgid "Navigation Area"
msgstr ""

#: templates/tmpl-slider-settings.php:21
msgid "Thumbnail Navigation"
msgstr ""

#: templates/tmpl-slider-settings.php:22
msgid "Videos"
msgstr ""

#: templates/tmpl-slider-settings.php:31
msgid "Slider dimensions"
msgstr ""

#: templates/tmpl-slider-settings.php:42
msgid "Responsive mode"
msgstr ""

#: templates/tmpl-slider-settings.php:53
msgid "Full-width slider settings"
msgstr ""

#: templates/tmpl-slider-settings.php:69 templates/tmpl-slider-settings.php:138
msgid "Other settings"
msgstr ""

#: templates/tmpl-slider-settings.php:89
msgid "Slideshow behavior"
msgstr ""

#: templates/tmpl-slider-settings.php:105
msgid "Starting slide options"
msgstr ""

#: templates/tmpl-slider-settings.php:116
msgid "Slideshow navigation"
msgstr ""

#: templates/tmpl-slider-settings.php:127
msgid "Looping"
msgstr ""

#: templates/tmpl-slider-settings.php:131
msgid ""
"Number of loops if automatically start slideshow is enabled (0 means "
"infinite!)"
msgstr ""

#: templates/tmpl-slider-settings.php:170
msgid ""
"You can change the skin of the slider. The 'noskin' skin is a border- and "
"buttonless skin. Your custom skins will appear in the list when you create "
"their folders as well."
msgstr ""

#: templates/tmpl-slider-settings.php:200
msgid "Custom slider CSS"
msgstr ""

#: templates/tmpl-slider-settings.php:210
msgid "Show navigation buttons"
msgstr ""

#: templates/tmpl-slider-settings.php:226
msgid "Navigation buttons on hover"
msgstr ""

#: templates/tmpl-slider-settings.php:237
msgid "Slideshow timers"
msgstr ""

#: templates/tmpl-slider-settings.php:263
msgid "Thumbnail dimensions"
msgstr ""

#: templates/tmpl-slider-settings.php:274
msgid "Thumbnail appearance"
msgstr ""

#: views/skin_editor.php:33 views/slider_edit.php:64 views/slider_list.php:90
#: views/style_editor.php:29 views/transition_builder.php:51
msgid "Show on screen"
msgstr ""

#: views/skin_editor.php:35 views/slider_list.php:91 views/style_editor.php:31
#: views/transition_builder.php:53
msgid "Tooltips"
msgstr ""

#: views/skin_editor.php:40 views/slider_edit.php:71 views/slider_list.php:99
#: views/style_editor.php:36 views/transition_builder.php:58
msgid "Screen Options"
msgstr ""

#: views/skin_editor.php:48
msgid "LayerSlider Skin Editor"
msgstr ""

#: views/skin_editor.php:49 views/slider_edit.php:134 views/style_editor.php:44
#: views/transition_builder.php:508
msgid "Back to the list"
msgstr ""

#: views/skin_editor.php:55 views/style_editor.php:50
#: views/transition_builder.php:512
msgid "Your changes has been saved!"
msgstr ""

#: views/skin_editor.php:65 wp/menus.php:39
msgid "Skin Editor"
msgstr ""

#: views/skin_editor.php:66 views/style_editor.php:59
msgid "Ctrl+Q to fold/unfold a block"
msgstr ""

#: views/skin_editor.php:68
msgid "Choose a skin:"
msgstr ""

#: views/skin_editor.php:80
msgid ""
"Built-in skins will be overwritten by plugin updates. Making changes should "
"be done through the Custom Styles Editor."
msgstr ""

#: views/skin_editor.php:85
msgid ""
"You need to make this file writable in order to save your changes. See the "
"<a href=\"http://codex.wordpress.org/Changing_File_Permissions\" target="
"\"_blank\">Codex</a> for more information."
msgstr ""

#: views/skin_editor.php:87 views/slider_edit.php:282 views/slider_list.php:436
#: views/slider_list.php:531 views/style_editor.php:84
#: views/transition_builder.php:1068
msgid "Save changes"
msgstr ""

#: views/skin_editor.php:88
msgid ""
"Modifying a skin with invalid code can break your sliders' appearance. "
"Changes cannot be reverted after saving."
msgstr ""

#: views/slider_edit.php:131
msgid "Editing slider:"
msgstr ""

#: views/slider_edit.php:148 views/slider_list.php:163
msgid "Slides"
msgstr ""

#: views/slider_edit.php:152
msgid "Event Callbacks"
msgstr ""

#: views/slider_edit.php:156
msgid "FAQ"
msgstr ""

#: views/slider_edit.php:160
msgid "Documentation"
msgstr ""

#: views/slider_edit.php:162
msgid "Need help? Try these: "
msgstr ""

#: views/slider_edit.php:186
msgid "Add new slide"
msgstr ""

#: views/slider_edit.php:201
msgid "Fires when LayerSlider has loaded"
msgstr ""

#: views/slider_edit.php:211
msgid "Calling when the slideshow has started."
msgstr ""

#: views/slider_edit.php:221
msgid "Calling when the slideshow is stopped by the user."
msgstr ""

#: views/slider_edit.php:231
msgid ""
"Fireing when the slideshow is temporary on hold (e.g.: \"Pause on hover\" "
"feature)."
msgstr ""

#: views/slider_edit.php:241
msgid "Calling when the slider commencing slide change (animation start)."
msgstr ""

#: views/slider_edit.php:251
msgid "Fireing when the slider finished a slide change (animation end)."
msgstr ""

#: views/slider_edit.php:261
msgid "Calling when the slider will change to the previous slide by the user."
msgstr ""

#: views/slider_edit.php:271
msgid "Calling when the slider will change to the next slide by the user."
msgstr ""

#: views/slider_list.php:65
msgid "No sliders were selected to remove."
msgstr ""

#: views/slider_list.php:66
msgid "The selected sliders were removed."
msgstr ""

#: views/slider_list.php:67 views/slider_list.php:71
msgid "No sliders were selected."
msgstr ""

#: views/slider_list.php:68
msgid "The selected sliders were permanently deleted."
msgstr ""

#: views/slider_list.php:69
msgid "You need to select at least 2 sliders to merge them."
msgstr ""

#: views/slider_list.php:70
msgid "The selected items were merged together as a new slider."
msgstr ""

#: views/slider_list.php:72
msgid "The selected sliders were restored."
msgstr ""

#: views/slider_list.php:74
msgid "No sliders were found to export."
msgstr ""

#: views/slider_list.php:75
msgid "No sliders were selected to export."
msgstr ""

#: views/slider_list.php:76
msgid "The PHP ZipArchive extension is required to import .zip files."
msgstr ""

#: views/slider_list.php:78
msgid "Choose a file to import sliders."
msgstr ""

#: views/slider_list.php:79
msgid "The import file seems to be invalid or corrupted."
msgstr ""

#: views/slider_list.php:80
msgid "Your slider has been imported."
msgstr ""

#: views/slider_list.php:81
msgid ""
"Your account does not have the necessary permission you have chosen, and "
"your settings have not been saved in order to prevent locking yourself out "
"of the plugin."
msgstr ""

#: views/slider_list.php:82
msgid "Permission changes has been updated."
msgstr ""

#: views/slider_list.php:83
msgid "Your Google Fonts library has been updated."
msgstr ""

#: views/slider_list.php:84
msgid "Your settings has been updated."
msgstr ""

#: views/slider_list.php:92
msgid "Removed sliders"
msgstr ""

#: views/slider_list.php:94
msgid "Show me"
msgstr ""

#: views/slider_list.php:94
msgid "sliders per page"
msgstr ""

#: views/slider_list.php:95 views/slider_list.php:219
msgid "Apply"
msgstr ""

#: views/slider_list.php:118
msgid "LayerSlider sliders"
msgstr ""

#: views/slider_list.php:120
msgid "Import sample sliders"
msgstr ""

#: views/slider_list.php:145
msgid "You haven't created any slider yet."
msgstr ""

#: views/slider_list.php:146
msgid "Click those buttons to add one or import our demo content."
msgstr ""

#: views/slider_list.php:160
msgid "Slider preview"
msgstr ""

#: views/slider_list.php:161
msgid "Name"
msgstr ""

#: views/slider_list.php:162
msgid "Shortcode"
msgstr ""

#: views/slider_list.php:164
msgid "Created"
msgstr ""

#: views/slider_list.php:165
msgid "Modified"
msgstr ""

#: views/slider_list.php:190
msgid "ago"
msgstr ""

#: views/slider_list.php:194
msgid "Duplicate this slider"
msgstr ""

#: views/slider_list.php:197
msgid "Remove this slider"
msgstr ""

#: views/slider_list.php:201
msgid "Restore removed slider"
msgstr ""

#: views/slider_list.php:211
msgid "Bulk Actions"
msgstr ""

#: views/slider_list.php:212
msgid "Remove selected"
msgstr ""

#: views/slider_list.php:213
msgid "Delete permanently"
msgstr ""

#: views/slider_list.php:215
msgid "Restore removed"
msgstr ""

#: views/slider_list.php:217
msgid "Merge selected as new"
msgstr ""

#: views/slider_list.php:223
msgid "items"
msgstr ""

#: views/slider_list.php:243
msgid "Auto-Updates"
msgstr ""

#: views/slider_list.php:244
msgid "Import / Export"
msgstr ""

#: views/slider_list.php:245
msgid "Permissions"
msgstr ""

#: views/slider_list.php:246
msgid "Google Fonts"
msgstr ""

#: views/slider_list.php:247
msgid "Advanced"
msgstr ""

#: views/slider_list.php:254
msgid "Receive update notifications and install new versions with 1-Click."
msgstr ""

#: views/slider_list.php:255
msgid "Read more"
msgstr ""

#: views/slider_list.php:259
msgid "This site is authorized to receive automatic updates."
msgstr ""

#: views/slider_list.php:261
msgid "This site is not yet authorized to receive plugin updates."
msgstr ""

#: views/slider_list.php:270
msgid "Enter your purchase code"
msgstr ""

#: views/slider_list.php:271
msgid ""
"To receive automatic updates, you need to enter your item purchase code. "
"Click on the Download button next to LayerSlider WP on your CodeCanyon "
"downloads page and choose the &quot;License certificate & purchase "
"code&quot; option. This will download a text file that contains your "
"purchase code."
msgstr ""

#: views/slider_list.php:272
msgid "and"
msgstr ""

#: views/slider_list.php:273
msgid "choose release channel"
msgstr ""

#: views/slider_list.php:274
msgid "Stable"
msgstr ""

#: views/slider_list.php:275
msgid ""
"Although pre-release versions meant to work properly, they might contain "
"unknown issues, and are not recommended for sites in production."
msgstr ""

#: views/slider_list.php:276
msgid "Beta"
msgstr ""

#: views/slider_list.php:279
msgid ""
"You can find your purchase code by selecting the License Certificate option "
"under LayerSlider's Download button on your"
msgstr ""

#: views/slider_list.php:280
msgid "CodeCanyon Downloads"
msgstr ""

#: views/slider_list.php:281
msgid "page."
msgstr ""

#: views/slider_list.php:285
msgid ""
"It seems you've received LayerSlider by a theme. Please note that the auto-"
"update feature only works if you've purchased the plugin directly from us on "
"<a href=\"http://codecanyon.net/item/layerslider-responsive-wordpress-slider-"
"plugin-/1362246\" target=\"_blank\">CodeCanyon</a>."
msgstr ""

#: views/slider_list.php:291 views/slider_list.php:377
msgid "Update"
msgstr ""

#: views/slider_list.php:292
msgid "Deauthorize this site"
msgstr ""

#: views/slider_list.php:293
msgid "Download latest version manually"
msgstr ""

#: views/slider_list.php:294
msgid "Check for updates"
msgstr ""

#: views/slider_list.php:303
msgid "Move sliders between sites, make backups, import demo content"
msgstr ""

#: views/slider_list.php:304
msgid ""
"The PHP ZipArchive extension is needed for exporting/importing images. The "
"plugin will only copy your slider settings if it's not available. In that "
"case please contact with your hosting provider."
msgstr ""

#: views/slider_list.php:318
msgid "Import"
msgstr ""

#: views/slider_list.php:319
msgid "Do not import images"
msgstr ""

#: views/slider_list.php:321
msgid ""
"Choose a LayerSlider export file downloaded previously to import your "
"sliders. In order to import from outdated versions, you need to create a "
"file and paste the export code into it. The file needs to have a .json "
"extension."
msgstr ""

#: views/slider_list.php:332
msgid ""
"Downloads an export file that contains your selected sliders to import on "
"your new site. You can select multiple sliders by holding the Ctrl/Cmd "
"button while clicking."
msgstr ""

#: views/slider_list.php:333 wp/menus.php:33
msgid "All Sliders"
msgstr ""

#: views/slider_list.php:345
msgid "Export"
msgstr ""

#: views/slider_list.php:354
msgid "Allow non-admin users to change plugin settings and manage your sliders"
msgstr ""

#: views/slider_list.php:359
msgid "Choose a role"
msgstr ""

#: views/slider_list.php:362
msgid "Super Admin"
msgstr ""

#: views/slider_list.php:364
msgid "Admin"
msgstr ""

#: views/slider_list.php:365
msgid "Editor, Admin"
msgstr ""

#: views/slider_list.php:366
msgid "Author, Editor, Admin"
msgstr ""

#: views/slider_list.php:367
msgid "Contributor, Author, Editor, Admin"
msgstr ""

#: views/slider_list.php:368
msgid "Custom"
msgstr ""

#: views/slider_list.php:371
msgid "enter a custom capability"
msgstr ""

#: views/slider_list.php:374
msgid ""
"You can specify a custom capability if none of the pre-defined roles match "
"your needs. You can find all the available capabilities on"
msgstr ""

#: views/slider_list.php:374
msgid "this page"
msgstr ""

#: views/slider_list.php:385
msgid "Choose from hundreds of custom fonts faces provided by Google Fonts"
msgstr ""

#: views/slider_list.php:397 views/slider_list.php:405
msgid "Load only on admin interface"
msgstr ""

#: views/slider_list.php:409
msgid "You didn't add any Google font to your library yet."
msgstr ""

#: views/slider_list.php:415
msgid "Enter a font name to add to your collection"
msgstr ""

#: views/slider_list.php:416
msgid "Search"
msgstr ""

#: views/slider_list.php:420
msgid "Choose a font family"
msgstr ""

#: views/slider_list.php:427
msgid "Add font"
msgstr ""

#: views/slider_list.php:428
msgid "Back to results"
msgstr ""

#: views/slider_list.php:439
msgid "Cyrillic"
msgstr ""

#: views/slider_list.php:440
msgid "Cyrillic Extended"
msgstr ""

#: views/slider_list.php:441
msgid "Devanagari"
msgstr ""

#: views/slider_list.php:442
msgid "Greek"
msgstr ""

#: views/slider_list.php:443
msgid "Greek Extended"
msgstr ""

#: views/slider_list.php:444
msgid "Khmer"
msgstr ""

#: views/slider_list.php:445
msgid "Latin"
msgstr ""

#: views/slider_list.php:446
msgid "Latin Extended"
msgstr ""

#: views/slider_list.php:447
msgid "Vietnamese"
msgstr ""

#: views/slider_list.php:453
msgid "Select new"
msgstr ""

#: views/slider_list.php:462 views/slider_list.php:469
#: views/slider_list.php:476
msgid "Remove character set"
msgstr ""

#: views/slider_list.php:481
msgid "Use character sets:"
msgstr ""

#: views/slider_list.php:491
msgid "Troubleshooting &amp; Advanced Settings"
msgstr ""

#: views/slider_list.php:492
msgid ""
"Don't change these options without experience, incorrect settings might "
"break your site."
msgstr ""

#: views/slider_list.php:500
msgid "Use slider markup caching"
msgstr ""

#: views/slider_list.php:502
msgid ""
"Enabled caching can drastically increase the plugin performance and spare "
"your server from unnecessary load."
msgstr ""

#: views/slider_list.php:505
msgid "Include scripts in the footer"
msgstr ""

#: views/slider_list.php:507
msgid ""
"Including resources in the footer can improve load times and solve other "
"type of issues. Outdated themes might not support this method."
msgstr ""

#: views/slider_list.php:510
msgid "Conditional script loading"
msgstr ""

#: views/slider_list.php:512
msgid ""
"Increase your site's performance by loading resources only when necessary. "
"Outdated themes might not support this method."
msgstr ""

#: views/slider_list.php:515
msgid "Concatenate output"
msgstr ""

#: views/slider_list.php:517
msgid ""
"Concatenating the plugin's output could solve issues caused by custom "
"filters your theme might use."
msgstr ""

#: views/slider_list.php:520
msgid "Use Google CDN version of jQuery"
msgstr ""

#: views/slider_list.php:522
msgid "This option will likely solve \"Old jQuery\" issues."
msgstr ""

#: views/slider_list.php:525
msgid "Put JS includes to body"
msgstr ""

#: views/slider_list.php:527
msgid ""
"This is the most common workaround for jQuery related issues, and is "
"recommended when you experience problems with jQuery."
msgstr ""

#: views/slider_list.php:540
msgid "LayerSlider News"
msgstr ""

#: views/slider_list.php:542
msgid "Filter:"
msgstr ""

#: views/slider_list.php:544
msgid "All"
msgstr ""

#: views/slider_list.php:545
msgid "Announcements"
msgstr ""

#: views/slider_list.php:546
msgid "Release log"
msgstr ""

#: views/slider_list.php:547
msgid "Beta versions"
msgstr ""

#: views/slider_list.php:550
msgid ">You have version"
msgstr ""

#: views/slider_list.php:550
msgid "installed"
msgstr ""

#: views/slider_list.php:569
msgid "The documentation is here"
msgstr ""

#: views/slider_list.php:569
msgid "Open this help menu to quickly access to our online documentation."
msgstr ""

#: views/style_editor.php:43
msgid "LayerSlider CSS Editor"
msgstr ""

#: views/style_editor.php:58
msgid "Contents of your custom CSS file"
msgstr ""

#: views/style_editor.php:67
msgid ""
"/* You can type here any CSS code that will be loaded both on your admin and "
"front-end pages."
msgstr ""

#: views/style_editor.php:69
msgid "Let us help you by giving a few exmaple CSS classes: */"
msgstr ""

#: views/style_editor.php:82
msgid ""
"You need to make your uploads folder writable in order to save your changes. "
"See the <a href=\"http://codex.wordpress.org/Changing_File_Permissions\" "
"target=\"_blank\">Codex</a> for more information."
msgstr ""

#: views/style_editor.php:85
msgid ""
"Using invalid CSS code could break the appearance of your site or your "
"sliders. Changes cannot be reverted after saving."
msgstr ""

#: views/transition_builder.php:84 views/transition_builder.php:366
#: views/transition_builder.php:586 views/transition_builder.php:918
msgid "Basic properties"
msgstr ""

#: views/transition_builder.php:89 views/transition_builder.php:371
#: views/transition_builder.php:591 views/transition_builder.php:923
msgid "Transition name"
msgstr ""

#: views/transition_builder.php:90 views/transition_builder.php:372
#: views/transition_builder.php:592 views/transition_builder.php:924
msgid ""
"The name of your custom transition. When you edit a slider, it will appear "
"with this name, so you can easily identify the individual transitions."
msgstr ""

#: views/transition_builder.php:93 views/transition_builder.php:375
#: views/transition_builder.php:597 views/transition_builder.php:929
msgid "Rows"
msgstr ""

#: views/transition_builder.php:94 views/transition_builder.php:376
#: views/transition_builder.php:598 views/transition_builder.php:930
msgid ""
"<i>number</i> or <i>min,max</i> If you specify a value greater than 1, "
"LayerSlider will cut your slide into tiles. You can specify here how many "
"rows of your transition should have. If you specify two numbers separated "
"with a comma, LayerSlider will use that as a range and pick a random number "
"between your values."
msgstr ""

#: views/transition_builder.php:95 views/transition_builder.php:377
#: views/transition_builder.php:599 views/transition_builder.php:931
msgid "Cols"
msgstr ""

#: views/transition_builder.php:96 views/transition_builder.php:378
#: views/transition_builder.php:600 views/transition_builder.php:932
msgid ""
"<i>number</i> or <i>min,max</i> If you specify a value greater than 1, "
"LayerSlider will cut your slide into tiles. You can specify here how many "
"columns of your transition should have. If you specify two numbers separated "
"with a comma, LayerSlider will use that as a range and pick a random number "
"between your values."
msgstr ""

#: views/transition_builder.php:101 views/transition_builder.php:383
#: views/transition_builder.php:605 views/transition_builder.php:937
msgid "Tiles"
msgstr ""

#: views/transition_builder.php:107 views/transition_builder.php:389
#: views/transition_builder.php:611 views/transition_builder.php:943
msgid ""
"You can apply a delay between the tiles and postpone their animation "
"relative to each other."
msgstr ""

#: views/transition_builder.php:108 views/transition_builder.php:390
#: views/transition_builder.php:612 views/transition_builder.php:944
msgid "Sequence"
msgstr ""

#: views/transition_builder.php:110 views/transition_builder.php:392
#: views/transition_builder.php:614 views/transition_builder.php:946
msgid "You can control the animation order of the tiles here."
msgstr ""

#: views/transition_builder.php:111 views/transition_builder.php:393
#: views/transition_builder.php:615 views/transition_builder.php:947
msgid "Forward"
msgstr ""

#: views/transition_builder.php:112 views/transition_builder.php:394
#: views/transition_builder.php:616 views/transition_builder.php:948
msgid "Reverse"
msgstr ""

#: views/transition_builder.php:113 views/transition_builder.php:395
#: views/transition_builder.php:617 views/transition_builder.php:949
msgid "Col-forward"
msgstr ""

#: views/transition_builder.php:114 views/transition_builder.php:396
#: views/transition_builder.php:618 views/transition_builder.php:950
msgid "Col-reverse"
msgstr ""

#: views/transition_builder.php:115 views/transition_builder.php:397
#: views/transition_builder.php:465 views/transition_builder.php:619
#: views/transition_builder.php:951 views/transition_builder.php:1019
msgid "Random"
msgstr ""

#: views/transition_builder.php:122 views/transition_builder.php:626
msgid "Depth"
msgstr ""

#: views/transition_builder.php:124 views/transition_builder.php:628
msgid ""
"The script tries to identify the optimal depth for your rotated objects "
"(tiles). With this option you can force your objects to have a large depth "
"when performing 180 degree (and its multiplies) rotation."
msgstr ""

#: views/transition_builder.php:126 views/transition_builder.php:630
msgid "Large depth"
msgstr ""

#: views/transition_builder.php:134 views/transition_builder.php:642
msgid "Before animation"
msgstr ""

#: views/transition_builder.php:136 views/transition_builder.php:272
#: views/transition_builder.php:644 views/transition_builder.php:802
msgid "Enabled"
msgstr ""

#: views/transition_builder.php:144 views/transition_builder.php:201
#: views/transition_builder.php:280 views/transition_builder.php:652
#: views/transition_builder.php:722 views/transition_builder.php:810
msgid ""
"The duration of your animation. This value is in millisecs, so the value "
"1000 means 1 second."
msgstr ""

#: views/transition_builder.php:180 views/transition_builder.php:256
#: views/transition_builder.php:316 views/transition_builder.php:536
#: views/transition_builder.php:555 views/transition_builder.php:701
#: views/transition_builder.php:782 views/transition_builder.php:859
msgid "Add new"
msgstr ""

#: views/transition_builder.php:182 views/transition_builder.php:258
#: views/transition_builder.php:318 views/transition_builder.php:703
#: views/transition_builder.php:784 views/transition_builder.php:861
msgid "Scale3D"
msgstr ""

#: views/transition_builder.php:194 views/transition_builder.php:715
msgid "Animation"
msgstr ""

#: views/transition_builder.php:236 views/transition_builder.php:458
#: views/transition_builder.php:757 views/transition_builder.php:1012
msgid "Direction"
msgstr ""

#: views/transition_builder.php:238 views/transition_builder.php:759
msgid "The direction of rotation."
msgstr ""

#: views/transition_builder.php:239 views/transition_builder.php:760
msgid "Vertical"
msgstr ""

#: views/transition_builder.php:240 views/transition_builder.php:761
msgid "Horizontal"
msgstr ""

#: views/transition_builder.php:270 views/transition_builder.php:800
msgid "After animation"
msgstr ""

#: views/transition_builder.php:329 views/transition_builder.php:488
#: views/transition_builder.php:872 views/transition_builder.php:1042
msgid "Transition options"
msgstr ""

#: views/transition_builder.php:335 views/transition_builder.php:494
#: views/transition_builder.php:878 views/transition_builder.php:1048
msgid "Remove transition"
msgstr ""

#: views/transition_builder.php:410 views/transition_builder.php:964
msgid ""
"The duration of the animation. This value is in millisecs, so the value 1000 "
"measn 1 second."
msgstr ""

#: views/transition_builder.php:452 views/transition_builder.php:1006
msgid "The type of the animation, either slide, fade or both (mixed)."
msgstr ""

#: views/transition_builder.php:453 views/transition_builder.php:1007
msgid "Slide"
msgstr ""

#: views/transition_builder.php:455 views/transition_builder.php:1009
msgid "Mixed"
msgstr ""

#: views/transition_builder.php:460 views/transition_builder.php:1014
msgid ""
"The direction of the slide or mixed animation if you've chosen this type in "
"the previous settings."
msgstr ""

#: views/transition_builder.php:466 views/transition_builder.php:1020
msgid "Top left"
msgstr ""

#: views/transition_builder.php:467 views/transition_builder.php:1021
msgid "Top right"
msgstr ""

#: views/transition_builder.php:468 views/transition_builder.php:1022
msgid "Bottom left"
msgstr ""

#: views/transition_builder.php:469 views/transition_builder.php:1023
msgid "Bottom right"
msgstr ""

#: views/transition_builder.php:480 views/transition_builder.php:1034
msgid "RotateZ"
msgstr ""

#: views/transition_builder.php:507
msgid "LayerSlider Transition Builder"
msgstr ""

#: views/transition_builder.php:523
msgid "3D transitions"
msgstr ""

#: views/transition_builder.php:525 views/transition_builder.php:544
msgid "Choose:"
msgstr ""

#: views/transition_builder.php:532
msgid "No 3D transitions yet"
msgstr ""

#: views/transition_builder.php:542
msgid "2D transitions"
msgstr ""

#: views/transition_builder.php:551
msgid "No 2D transitions yet"
msgstr ""

#: views/transition_builder.php:887
msgid "You didn't create any 3D transitions yet"
msgstr ""

#: views/transition_builder.php:888 views/transition_builder.php:1058
msgid "To create a new transition, click to the \\\"Add new\\\" button above."
msgstr ""

#: views/transition_builder.php:1057
msgid "You didn't create any 2D transitions yet"
msgstr ""

#: views/transition_builder.php:1070
msgid ""
"Before you can save your changes, you need to make your \"/wp-content/uploads"
"\" folder writable. See the <a href=\"http://codex.wordpress.org/"
"Changing_File_Permissions\" target=\"_blank\">Codex</a>"
msgstr ""

#: views/transition_builder.php:1094
msgid "Transition Builder documentation"
msgstr ""

#: views/transition_builder.php:1094
msgid ""
"To get started with the LayerSlider WP Transition Builder, please read our "
"online documentation by clicking on this help menu."
msgstr ""

#: wp/actions.php:523 wp/actions.php:549
msgid ""
"It looks like your files isn't writable, so PHP couldn't make any changes "
"(CHMOD)."
msgstr ""

#: wp/actions.php:523 wp/actions.php:549
msgid "Cannot write to file"
msgstr ""

#: wp/actions.php:537
msgid "It looks like you haven't selected any skin to edit."
msgstr ""

#: wp/actions.php:537
msgid "No skin selected."
msgstr ""

#: wp/menus.php:45
msgid "CSS Editor"
msgstr ""

#: wp/menus.php:50
msgid "Transition Builder"
msgstr ""

#: wp/notices.php:41 wp/notices.php:65
msgid "An update is available for LayerSlider WP!"
msgstr ""

#: wp/notices.php:43
#, php-format
msgid "You have version %1$s. Update to version %2$s."
msgstr ""

#: wp/notices.php:45 wp/notices.php:46
msgid "Install now"
msgstr ""

#: wp/notices.php:67
#, php-format
msgid "You have version %1$s. The latest version is %2$s."
msgstr ""

#: wp/notices.php:68
msgid ""
"New releases contain new features, bug fixes and various improvements across "
"the entire plugin."
msgstr ""

#: wp/notices.php:69
msgid ""
"Set up auto-updates to upgrade to this new version, or request it from the "
"author of your theme if you've received LayerSlider from them."
msgstr ""

#: wp/notices.php:69
msgid "Click here"
msgstr ""

#: wp/notices.php:69
msgid "to learn more"
msgstr ""

#: wp/notices.php:70
msgid "Hide this message"
msgstr ""

#: wp/notices.php:83
msgid "The new version of LayerSlider WP is almost ready!"
msgstr ""

#: wp/notices.php:85
msgid ""
"For a faster and more reliable solution, LayerSlider WP needs to convert "
"your data associated with the plugin. Your sliders and settings will remain "
"still, and it only takes a click on this button."
msgstr ""

#: wp/notices.php:88
msgid "Convert Data"
msgstr ""

#: wp/notices.php:100
msgid "Server configuration issues detected!"
msgstr ""

#: wp/notices.php:102
msgid ""
"phpQuery, an external library in LayerSlider, have unmet dependencies. It "
"requires PHP5 with the following extensions installed: PHP DOM extension, "
"PHP Multibyte String extension. Please contact with your hosting provider to "
"resolve these dependencies, as it will likely prevent LayerSlider from "
"functioning properly."
msgstr ""

#: wp/notices.php:103
msgid "This issue could result a blank page in slider builder."
msgstr ""

#: wp/notices.php:115
msgid "Would you like to receive automatic updates and premium support?"
msgstr ""

#: wp/notices.php:117
msgid ""
"By activating the plugin with your Item Purchase Code you can receive update "
"notifications with one-click installation and better support services. This "
"is optional and not needed if you've received LayerSlider bundled with a "
"theme."
msgstr ""

#: wp/notices.php:132
#, php-format
msgid ""
"You need to authorize this site in order to get upgrades or support for this "
"plugin. %sPurchase a license%s or %senter an existing purchase code%s."
msgstr ""

#: wp/shortcodes.php:52
msgid "LayerSlider encountered a problem while it tried to show your slider."
msgstr ""

#: wp/shortcodes.php:53
msgid ""
"Please make sure that you've used the right shortcode or method to insert "
"the slider, and check if the corresponding slider exists and it wasn't "
"deleted previously."
msgstr ""

#: wp/widgets.php:10
msgid "Insert a slider with LayerSlider WP Widget"
msgstr ""

#: wp/widgets.php:12
msgid "LayerSlider WP Widget"
msgstr ""

#: wp/widgets.php:33
msgid "LayerSlider"
msgstr ""

#: wp/widgets.php:39
msgid "Choose a slider:"
msgstr ""

#: wp/widgets.php:52
msgid "You didn't create any slider yet."
msgstr ""

#: wp/widgets.php:56
msgid "Title:"
msgstr ""

#, fuzzy
#~ msgid ""
#~ "The timing function of the animation to manipualte the layer's movement. "
#~ "Click on the link next to this field to open easings.net for examples and "
#~ "more information"
#~ msgstr ""
#~ "The timing function of the animation. With this function you can "
#~ "manipualte the movement of the animated object. Please click on the link "
#~ "next to this select field to open easings.net for more information and "
#~ "real-time examples."
